SUPERFINE™
DESCRIPTION
Superfine™ is a fine uniform surface medium density, resin bonded particleboard, especially developed for overlay use in furniture and joinery.
USES
Superfine is specially designed as a substrate for the following applications:
• Vinyl overlays
• Paint finishes
• D.A.P or low pressure melamine overlays
• Substrate for wood veneer overlays
• Substrate for plastic laminates
• Furniture components
• Commercial shop fittings
LIMITATIONS
Superfine medium density particleboard is interior bonded and is intended for dry interior use only.
STORAGE
Correct storage procedures will eliminate sagging and permanent distortion of sheets.
• Store away from heat and direct sunlight
• Position 60mm minimum gluts, true to line, on a level dry floor ensuring that they run full pack width
• Line gluts vertically one above the other
• Place end gluts a minimum 300mm from each end. Provide at least three supports per 2400mm pack and four per 3600mm pack (see Fig 1)
• Cut strapping as soon as practicable to avoid indentations
• Superfine panels must be protected from the weather. A breather type cover must be supported clear of the top and sides of the panels using battens to allow air to circulate freely
COMPOSITION
Superfine is composed of engineered wood flakes bonded under heat and pressure using Urea Formaldehyde resin. The resulting grainless particleboard sheets are sanded ready for use.
DURABILITY
When stored, handled, installed and maintained in accordance with this document, Superfine will meet the provisions of NZBC B2.3.1(c) for 5 years (dependant on end use).
The Laminex Group will not be liable to any person if the conditions as to storage, handling, installation and maintenance of Superfine as outlined within this document are not complied with.
For further information click on the links below. To view PDF files, you will
need Adobe's Acrobat Reader. You can download the Reader install file by
clicking on the Acrobat Reader link:
|